Nexus Pneumatics Private Limited

• Pneumatic Toggle Clamps relieve operator of strenuous clamping movement
• A number of clamps can be used simultaneously 
• A number of clamps with different sequences can be simultaneously operated 
• One or more clamps can be controlled from the machine panel 
• One or more clamps can be operated from different positions 
• Clamps stay locked in the event of air failure 
• Low air consumption with maximum leverage 
• Large opening angle ensures easy component removal 
• Assurance of a maximum power-to movement ratio 
• Production time is reduced by 40%     

H. V. Series Pneumatic Clamps

• These clamps are the air powered version of the manual H.V. Series. They comprise
• of a very strong  and rugged toggle mechanism actuated by a double acting cylinder.
• The clamping arm is provided with the clamp and can be welded at any desired
• angle to suit the individual requirement of work pieces. These clamps carry the
• Over Centre Toggle Lock principle for maximum safety as they remain in locked
• condition even in case of air failure. The  clamps  have almost all the features of the
• manual H. V. Series clamps. These clamps are available in three sizes off  the  shelf

• Steel-Smith supplies all Pneumatic Clamps with magnetic cylinders, a standard reed switch can be mounted on these cylinders for sensing.
• It is highly recommended that all the Pneumatic Clamps are used with flow control valve on both ports of the Cylinders. This ensure that the clamping arm clamps the component at a regulated speed. 

• Low Control Valves 
• Reed Switch Mounting Slot